Verkeers afbakening

Toont alle 200 resultaten

  • The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • 1M Dominator™ Cone Twin Sealbrite Sleeve

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • 1M Glopost Sealbrite Sleeve

    Blow moulded from UV stabilised low density polyethylene. Specific twist-lock designed base to suit either permanent metal cats eye sockets or temporary base. Fitted with BS873: Part 6 Des 2 Sleeve, Suitable for use with UniBase.

  • 1M Sand Weighted Cone

    One-piece cone complete with Des 2 reflective sleeve with traditional hexagonal base design. Sand weighting contained in a sealed moulded base.

  • 2012 Heavy Duty Base for Chain Support Post

    Base for Post and Chain

    This heavy duty base securely holds the Post and Chain
    This base is made from a recycled PVC and weighs in at around 3kg giving the posts a secure footing. Due to its manufacture method we have also been able to reduce the footprint of the base taking up less floor space when set up improving access.

  • 30cm Sports Cone Sand Weighted Blue

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 30cm Sports Cone Sand Weighted Green

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 30cm Sports Cone Sand Weighted Red

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 30cm Sports Cone Sand Weighted Yellow

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 45cm Sports Cone Sand Weighted Blue

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 45cm Sports Cone Sand Weighted Green

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 45cm Sports Cone Sand Weighted Red

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 45cm Sports Cone Sand Weighted Yellow

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 50cm Dominator™ Cone Sealbrite Sleeve

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • 50cm Dominator™ Cone Twin Sealbrite Sleeve

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • 50cm No Waiting Dominator™ Cone Yellow

    Dominator™No Waiting Conen
    nThe Dominator two-part no waiting cone offers an effective way to prevent road users from parking and obstructing others on the road. The new reflective feature allows maximum visibility in low light making this one of the most practical ‘No Waiting’ cones available on the market. n

    nFeaturesn
    n• Two-part moulded cone with UV stabalised LDPE blow moulded yellow top and heavy duty 100% recycled composite base.n
    n• Complete with ‘No Waiting’ roundel. n
    n
    n ReCONEditioning™ servicen
    nDid you know that we recycle your old cones ? Even other makes ! Please contact us for more details.

  • 50cm Roadhog™ 1150 Cone Sealbrite Sleeve

    100% recycled cone complete with reflective sleeve.

  • 50cm Roadhog™ 1150 No Waiting Cone

    Roadhog™ No Waiting Conen
    nThe Roadhog™ No Waiting cone offers an effective way to prevent road users from parking and obstructing others on the road. The new reflective feature allows maximum visibility in low light making this one of the most practical ‘No Waiting’ cones available on the market. n

    nFeaturesn
    n• A 100% recycled sturdy one-piece cone featuring a distinctive extended black base area. n
    n• Complete with a ‘No Waiting’ roundel. n
    n
    n ReCONEditioning™ servicen
    nDid you know that we recycle your old cones ? Even other makes ! Please contact us for more details.

  • 50cm Sealbrite Sleeve

    Replacement Sealbrite sleeve for 50cm traffic cones.

  • 60cm Sports Cone Sand Weighted Blue

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 60cm Sports Cone Sand Weighted Green

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 60cm Sports Cone Sand Weighted Red

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 60cm Sports Cone Sand Weighted Yellow

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 6mm Chain 25M dark green

    6mm Chain 25M dark greennn

    nDesigned for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.n

  • 6mm Chain 25M Red/White

    Designed for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.

  • 6mm Chain 25M Yellow/Black

    Designed for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.

  • 6mm yellow/black chain kit

    6mm Chain 25M yellow/black chain kitnn

    nDesigned for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.n

  • Placeholder
  • 75cm Dominator™ Cone Sealbrite Sleeve

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • Placeholder
  • 75cm Dominator™ Cone Twin Sealbrite Sleeve

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • 75cm Glopost Sealbrite Sleeve

    Blow moulded from UV stabilised low density polyethylene. Specific twist-lock designed base to suit either permanent metal cats eye sockets or temporary base. Fitted with BS873: Part 6 Des 2 Sleeve, Suitable for use with UniBase.

  • 75cm Navigator™ Cone Sealbrite Sleeve

    Navigator™ 2 Part Cone. Made to the highest standard using the latest manufacturing technologies. Features a 360° hand grip, Class R1B Sleeve and cone top recycling.

  • 75cm Roadhog™ 1175 Cone Sealbrite Sleeve

    100% recycled cone complete with reflective sleeve.

  • 75cm SEALBRITE SLEEVE SAND WTD.

    One-piece cone complete with Des 2 reflective sleeve with traditional hexagonal base design. Sand weighting contained in a sealed moulded base.

  • 75cm Sports Cone Sand Weighted Blue

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 75cm Sports Cone Sand Weighted Green

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 75cm Sports Cone Sand Weighted Red

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 75cm Sports Cone Sand Weighted Yellow

    Sand weighted base for additional stability and curved top for supporting poles for sports purposes. Add appropriate number to the product code to select a colour: 02 – Yellow, 03 – Green, 05 – Blue, 06 – Red.

  • 75cm Springback Cylinder Sealbrite Sleeve

    Moulded post with integral shock cord device allows post to revert to upright after impact. Comes complete with conforming Sealbrite Sleeve. Ideal for delineating traffic in areas such as airports, car parks, docksides etc.

    Unibase™ Sold Separately

  • 75cm Springback Cylinder Sealbrite Sleeve c/w Chain Hook

    75cm Springback Cylinder Sealbrite Sleeve c/w Chain Hooknn
    nMoulded post with integral shock cord device allows post to revert to upright after impact. Comes complete with conforming Sealbrite Sleeve. Ideal for delineating traffic in areas such as airports, car parks, docksides etc.

    nUnibase™ Sold Separatelyn
    nFeatures & Benefits n

      n

    • Chain hook – Added hook allowing easy use when fencing areas offn
    • Strong Design – Blow moulded from UV stabilised low density polyethylene.
    • n

    • Increased Stability – Specific twist lock designed base.
    • n

    • Reflective – Fitted with BS873: Part 6 Des 2 Sleeve.
    • n

    • Application – Suits either permanent metal cats eye sockets or temporary base
    • n

  • 8mm Chain 25M Red/White

    Designed for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.

  • 8mm Chain 25M Yellow/Black

    Designed for use with posts or cones to form a multi-functional barrier system. Can be fitted to matching coloured posts with base. Ideal as a crowd channeliser, or to cordon off an area. Suitable for warehouses, factories, hospitals, colleges, receptions, and offices.

  • Placeholder

    AlphaBloc™ – 1m Red

    nnnnUntitled DocumentnnnnnnnnnUntitled DocumentnnnnnAlphabloc™ n
    n
    nA-Game Stability And Storage
    nThe uniquely foldable AlphaBloc™ Space Saver has been developed as a convenient alternative to the conventional style of water filled seperators, allowing increased quantities on a pallet at less stacking height. n

    nStorage and Distributionn
    n• Increased pallet quantity at a total of 40, which reduces storage capacity and aids distribution.
    n• Design enables a contractor to half the cost of storage and transport, reducing their carbon footprint.n
    n
    nUnique Folding Designn
    n• Blow moulded HDPE blocs with strong durable hinge system and carry handle.
    n• 1 meter long x 600mm high x 400mm deep. n
    n
    nIncreased Stabilityn
    n• Water fillable to increase ballast/weight for added stability. n
    n
    nCorporate Brandingn
    n• Large 180mm x 110mm plate area enables contractor details to be embossed and highlighted, whilst also acting as a pilferage deterrent. n

    nConfigurationn
    n• Acute angled bloc design allows for multiple configurations on both flat and uneven surfaces.

  • Placeholder

    AlphaBloc™ – 1m White

    nnnnUntitled DocumentnnnnnnnnnUntitled DocumentnnnnnAlphabloc™ n
    n
    nA-Game Stability And Storage
    nThe uniquely foldable AlphaBloc™ Space Saver has been developed as a convenient alternative to the conventional style of water filled seperators, allowing increased quantities on a pallet at less stacking height. n

    nStorage and Distributionn
    n• Increased pallet quantity at a total of 40, which reduces storage capacity and aids distribution.
    n• Design enables a contractor to half the cost of storage and transport, reducing their carbon footprint.n
    n
    nUnique Folding Designn
    n• Blow moulded HDPE blocs with strong durable hinge system and carry handle.
    n• 1 meter long x 600mm high x 400mm deep. n
    n
    nIncreased Stabilityn
    n• Water fillable to increase ballast/weight for added stability. n
    n
    nCorporate Brandingn
    n• Large 180mm x 110mm plate area enables contractor details to be embossed and highlighted, whilst also acting as a pilferage deterrent. n

    nConfigurationn
    n• Acute angled bloc design allows for multiple configurations on both flat and uneven surfaces.

  • Asphalt Fixing Bolts – Pack of 2

    Bolts for fixing Jumbo™ Ramps to asphalt.

  • Placeholder

    Baram Frontier – 2M – Blue

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Barrier Board Clips Pack of 4

    Ad board clipsn
    nPack of 4 clips that enable you to signage to your JSP barriers.n

  • Placeholder
  • Placeholder
  • C.Spratt 1M Dominator™ Cone – Sealbrite – EMB body & base

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • C.Spratt 75CM Dominator™ Cone – Sealbrite – EMB body & base

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • C.Spratt Frontier® – 2M – Antitrip – Grey

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Caution Markers 26m

    Caution Markers
    nRed and white caution markers on a red rope. Perfect for warehouse deliniation and tempory area fencing.

  • Chain Support Post Blue/White

    Extended posts complete with chain support cap.

  • Chain Support Post Red/White

    Extended posts complete with chain support cap.

  • Chain Support Post Yellow/Black

    Extended posts complete with chain support cap.

  • Champion™ Barrier Base

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Champion™ Folding System 0.75M

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation. Please note: Barrier bases (feet) sold seperately.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Champion™ Folding System 1.25M

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation. Please note: Barrier bases (feet) sold seperately.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Champion™ Folding System 1.5M

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation. Please note: Barrier bases (feet) sold seperately.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Champion™ Folding System 1M

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation. Please Note: Barrier bases (feet) sold seperately.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Champion™ Folding System 2M

    The Champion™ Barrier system offers exceptional value for money over life time use. Complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness. Lamps are easily attached for additional night time visibility. Easily squared or linear sited and folds for efficient storage. 5 standard lengths, bases to suit. Easy to site and easy to store in vehicles or depots.

    Reflective
    Reflective top boards and plain white lower boards.

    Hinged
    The hinged boards mean that the Champion™ can be used for square siting around excavations or as a linear barrier along cabling or trenching sites.

    Length Options
    nThe Champion™ comes in a variety of lengths which enables the system to be erected in either a linear or boxed format.

    Robust
    It comes complete with galvanised nuts, bolts and washers which connect hinges, giving increased rigidity and robustness.

    Base Options
    With four ports the sturdy base is ideal for creating multi-directional demarcation. Barrier bases (feet) sold seperately.

    Convenient
    Easy to carry, deploy and site, as well as store in vehicles or depots.

  • Churchill™ Verge Post

    Sturdy blow moulded cylindrical design with hi vis reflective area conforming to RI EN12899-1 class R2 reflectors. Multipurpose usage ranging from highway verges to hard standing area. Dimensions W125mm, H 1310mm. Weight 1.4kg.

  • City of London 75cm Dominator™ Cone Sealbrite Sleeve

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • Concrete Fixing Bolts (Pair)

    Bolts for fixing Jumbo™ Ramps to concrete.

  • Cone Chain Connnector Red

    Fits on cones to be used to support chains.

  • Placeholder

    Dutton Group Titan™ Anti Trip 2M – Lime Green

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • East Sussex Highways Frontier Anti Trip – 2M – Orange

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Placeholder

    Essex Utilities Titan™ Anti Trip 2M – White

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Placeholder
  • Fence Support Base Orange

    Designed to accommodate barrier fencing.

  • Fence Support Post White

    Designed to accommodate barrier fencing.

  • Fencebrite™ 2M reflective strips for security fencing

    Fencebrite™ 2M red/white reflective for security fencing comes with fitting strapsnn
    nAvaliable in 2M and 3M reflective strips for security fencing. Fitting straps are included.
    n
    nFeatures & Benefits n

      n

    • Increase visibility – Attach to fencing and similar objects to increase visibility for vehicles.
    • n

    • Fitting – Easily attach and reattach to objects via included fitting straps
    • n

  • Fencebrite™ 3.5M reflective strips for security fencing

    Fencebrite™ 3M red/white reflective for security fencing comes with fitting strapsnn
    nAvaliable in 2M and 3.5M reflective strips for security fencing. Fitting straps are included.
    n
    nFeatures & Benefits n

      n

    • Increase visibility – Attach to fencing and similar objects to increase visibility for vehicles.
    • n

    • Fitting – Easily attach and reattach to objects via included fitting straps
    • n

  • Footway Closed Barrier Sign Pack of 10

    Flexible PVC sign for use with the TITAN™ barrier.

  • Placeholder

    Frontier 2M Magenta (P254C) Logo’d CARRIS

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Frontier® 2M Traffic Barrier – Orange

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Frontier® 2M Traffic Barrier Anti-Trip Black Feet – Orange

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Frontier® 2M Traffic Barrier Anti-Trip Hi Vis Feet – Orange

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Placeholder

    G.I.T.M Frontier Anti Trip – 2M – Blue

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Glue Mat to suit Unibase™

    For use with SpringBack cylinders. Manufactured from 100% recycled PVC. Can be positioned utilising either bitumen ‘GlueMats’ or with asphalt or concrete fixing bolts. Designed to accept ‘GloPosts’ and other manufacturers cylinders.

  • Grit Bin 1.75CUFT/50KG Black

    A 50kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 32 to a pallet.

  • Grit Bin 1.75CUFT/50KG Black/Yellow

    A 50kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 32 to a pallet.

  • Grit Bin 1.75CUFT/50KG Granite

    A 50kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 32 to a pallet.

  • Grit Bin 1.75CUFT/50KG Sandstone

    A 50kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 32 to a pallet.

  • Grit Bin 1.75CUFT/50KG Yellow

    A 50kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 32 to a pallet.

  • Grit Bin 12CUFT/450KG Black

    A 350kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Grit Bin 12CUFT/450KG Black/Yellow

    A 450kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Grit Bin 12CUFT/450KG Yellow

    A 350kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Grit Bin 7CUFT/250KG Black

    A 250kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Grit Bin 7CUFT/250KG Black/Yellow

    A 250kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Grit Bin 7CUFT/250KG Yellow

    A 250kg capactiy Grit Bin made from UV stabilised HDPE of which yellow being virgin and black of re-processed material. They are available in various colour combinations which, together with the large branding area on the front section, gives you various ways of branding and personalising the bin. Moulded finger grips make the lid easy to lift whilst access points on the base make the bin convenient for lifting with a fork lift. The bins fit inside each other for easy stacking and fit 14 to a pallet.

  • Interlocking Barrier Link Peg Pack of 10

    Link pegs – Pack of 10 link pegs
    nIncrease the compatibility of your barrier with the addition of a link peg. The link peg allows the barrier to link with other popular models.
    n

  • Jumbo™ 500 5cm Speed Ramps 10MPH (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm 500mm x 400mm for 10mph and 4mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Jumbo™ 500 7.5cm Speed Ramps 4MPH (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm 500mm x 400mm for 10mph and 4mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Jumbo™ 5cm End Caps Black (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm for 4mph and 10mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Jumbo™ 5cm End Caps Yellow (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm for 4mph and 10mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Jumbo™ 7.5cm End Caps Black (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm for 4mph and 10mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Jumbo™ 7.5cm End Caps Yellow (Pair)

    An exceptionally tough speed ramp made from 100% recycled material, that is available in two heights, 50mm and 75mm for 4mph and 10mph zones respectively.

    Interlocking
    Each Section has an integral interlocking facility for ease of siting and installation.

    Reflectors
    Each inner section has incorporated white reflectors for extra visibility.

    Hose/Cables Channel
    40mm x 25mm channel on the underside allowing for hose/cables to be located in.

    Pre-Drilled Bolt Holes
    All sections are pre-drilled ready for inserting relevant bolt for specific road surface, i.e. concrete or asphalt.

    Branding Area
    120mm x 60mm area allowing for a clients name to be embossed.

  • Kier 1M Dominator™ Cone – Sealbrite – EMB body

    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • Kingham™ Verge Post

    Toughened polyethylene blow moulded design with large reflective area conforming to RI EN12899-1 class R2 reflectors. Multipurpose posts which can be used on verges or be set into hardcore for car parks or similar delineation. Dimensions W150mm, H 1200mm. Weight 2.1kg.

  • Placeholder

    Marlborough Titan™ Anti Trip 2M – Grey

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Maxilite™ LED

    Maxilite™ LED

    The Maxilite LED is the latest lamp from JSP. This Dual function lamp is bright, versitile and long lasting.

    Carry handle – Practical moulded carry handle nto aid transporting and siting.

    Swivel head – The lens surround swivels giving 360° vision.

    Static or Flashing – Dual function photocell operation.

    Allen key – Each lamp has an allen key for bolt assembly and mode operation.

    Versatility – Can be fixed to barriers simply using the included bolt, or to cones using the cone/lamp bracket

    (Bracket sold seperately)

    Extended battery life – The MaxiLite™ uses energy saving LED bulbs to enhance battery life giving an extended period of use.

    Conforms to EN12352 and BS3143 Part 2.

  • Metal Fencing Pins 1.2cm x1.37M (Pack of 10)

    For use with web fencing or as a general fencing aid.

  • Microlite™ MK2 FNPC

    360° lens for all round light visibility. Conforms to EN12352 and BS3143 Part 2.

  • Microlite™MK2 FPC

    360° lens for all round light visibility. Conforms to EN12352 and BS3143 Part 2.

  • Placeholder

    Mildren Frontier Anti Trip – 2M – Orange

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • MK2 No Waiting Sand Weighted Cone

    Mk™2 No Waiting Conen
    nThe Mk™2 No Waiting cone offers an effective way to prevent road users from parking and obstructing others on the road. The new reflective feature allows maximum visibility in low light making this one of the most practical ‘No Waiting’ cones available on the market. n

    nFeaturesn
    n• The Mk™2 ‘No Waiting’ cone is moulded from UV stabilised polythylene with a sand weighted base. n
    n
    n ReCONEditioning™ servicen
    nDid you know that we recycle your old cones ? Even other makes ! Please contact us for more details.

  • MK4® 2 Part No Waiting Cone

    Mk™4 No Waiting Conen
    nThe Mk™4 No Waiting cone offers an effective way to prevent road users from parking and obstructing others on the road. The new reflective feature allows maximum visibility in low light making this one of the most practical ‘No Waiting’ cones available on the market. n

    nFeaturesn
    n• The Mk™4 two – piece’ No Waiting’ cone is made with a UV stabilised LDPE top and a 100% recycled PVC base. n
    n
    n ReCONEditioning™ servicen
    nDid you know that we recycle your old cones ? Even other makes ! Please contact us for more details.

  • MK5® 2 Part No Waiting Cone

    Reflective Mk™5 No Waiting Cone n
    n
    nThe new Mk™5 No Waiting Cone offers an effective way to prevent road users from parking and obstructing others on the road. The new reflective feature allows maximum visibility in low light making this one of the most practical ‘No Waiting’ cones available on the market. n

    nFeaturesn
    n•Fully conforms to road regulations with 200mm roundeln
    n•100% recycled PVC basen
    n• Blow moulded polythylene conen
    n• 200 per pallet

  • Moorgate™ 1000mm Panel

    A tough, stable and lightweight barrier system which is available either ready assembled for immediate use or as individual panels for constructors own configuration. Each gate is 1M high by 80cm wide and features unique designed flexible coupling clips. The MoorGate™ is ideal for siting around short duration works.

  • Moorgate™ 3 Gate Assembled Version

    A tough, stable and lightweight barrier system which is available either ready assembled for immediate use or as individual panels for constructors own configuration. Each gate is 1M high by 80cm wide and features unique designed flexible coupling clips. The MoorGate™ is ideal for siting around short duration works.

  • Moorgate™ 4 Gate Assembled Version

    A tough, stable and lightweight barrier system which is available either ready assembled for immediate use or as individual panels for constructors own configuration. Each gate is 1M high by 80cm wide and features unique designed flexible coupling clips. The MoorGate™ is ideal for siting around short duration works.

  • Moorgate™ Clip

    A tough, stable and lightweight barrier system which is available either ready assembled for immediate use or as individual panels for constructors own configuration. Each gate is 1M high by 80cm wide and features unique designed flexible coupling clips. The MoorGate™ is ideal for siting around short duration works.

  • Morrison US Frontier® – 2M – Antitrip – Red

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Murphy Titan™ Barrier Green – 2M – White AntiTrip feet

    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • No Waiting Sleeve to suit 50cm Cone

    Moulded from UV stabilised polyethylene and Dominator base weighted.

  • Pedestrians Left Barrier Sign Pack of 10

    Flexible PVC sign for use with the TITAN™ barrier.

  • Pedestrians Right Barrier Sign Pack of 10

    Flexible PVC sign for use with the TITAN™ barrier.

  • Portacone™ Signs

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Footway Closed

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Pedestrian Left

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Pedestrian Right

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Road Keep Left

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Road Keep Right

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Road Narrows Left

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Road Narrows Right

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Portacone™ Sign Black Road Works

    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Placeholder

    Portagate™ 3 Gate Compact Barrier

    Portagate™ Compact Barrier Gate System
    nThe Portagate™ is a blow moulded high density polyethylene barrier, supplied as a 3 or 4 gate system. Light and compact, the Portagate™ is designed to meet communications industry requirements and enables increased quantities per vehicle.
    n

  • Configurations – Adjoining clips allow multi-positioning configurations to be formed such as a triangle, a square or a single line.
  • n

  • Firm hold – By sliding the top hinge clip down panels can be locked securely into formations.
  • Added stability – Designed to accept anti-trip feet for increase stability.
  • Temporary signage – Recesses are included for toggle mounted courtesy signs to enable the system to be fully closed with the signs still attached.
  • Reflective panels – Class R1 reflective panels which are 20% more reflective than standard lower grade reflective material conforming to BS 8442.
  • Stackable – Can be stacked in any 180° orientation to a height of 20 units for 4 gate systems and 25 for 3 gate systems.
  • Branding available – Barriers can be produced in any colour to match corporate branding and contractor details can be embossed on the barriers. MOQ’s apply, contact us for details +44 (0) 1993 826050.
  • Placeholder

    Portagate™ 4 Gate Compact Barrier

    Portagate™ Compact Barrier Gate System
    nThe Portagate™ is a blow moulded high density polyethylene barrier, supplied as a 3 or 4 gate system. Light and compact, the Portagate™ is designed to meet communications industry requirements and enables increased quantities per vehicle.
    n

  • Configurations – Adjoining clips allow multi-positioning configurations to be formed such as a triangle, a square or a single line.
  • n

  • Firm hold – By sliding the top hinge clip down panels can be locked securely into formations.
  • Added stability – Designed to accept anti-trip feet for increase stability.
  • Temporary signage – Recesses are included for toggle mounted courtesy signs to enable the system to be fully closed with the signs still attached.
  • Reflective panels – Class R1 reflective panels which are 20% more reflective than standard lower grade reflective material conforming to BS 8442.
  • Stackable – Can be stacked in any 180° orientation to a height of 20 units for 4 gate systems and 25 for 3 gate systems.
  • Branding available – Barriers can be produced in any colour to match corporate branding and contractor details can be embossed on the barriers. MOQ’s apply, contact us for details +44 (0) 1993 826050.
  • Placeholder

    R&W Frontier Anti Trip – 2M – Orange

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Placeholder

    Riney Portacone™ Sign – Blue – Pedestrian Please Use Other F

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Placeholder

    Riney Portacone™ Sign – Red – Road Footway Closed

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Footway Closed

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Keep Left

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Keep Right

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Narrows Left

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Narrows Right

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Pedestrian Left

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Pedestrian Right

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Riney Portacone™ Sign – Yellow – Road Works Left

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    A stylish new range of cone signs offering a totally bespoke signage solution.Lightweight
    Made from coloured Polyethelene these signs are much lighter than metal signs so an increased number can be carried on vehicles.

    Recyclable
    The black signs are made from 100% re-processed LDPE, coloured bespoke versions use virgin LDPE but all can be recycled.

    Branding
    Coloured frames can be chosen to represent a corporate image and company names can be embossed in black highlighting company profile and deterring pilferage.

    Secure
    Tough webbing straps riveted to rear of sign, providing good grip to cone.

    Protective Rim
    Recessed outer rim protecting reflective face.

  • Road Closed Barrier Sign Pack of 10

    Flexible PVC sign for use with the TITAN™ barrier.

  • Roadbloc™ 1M Red

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Roadbloc™ 1M Reflective Boards

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Roadbloc™ 1M White

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Roadbloc™ Reflective 1M Red

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Roadbloc™ Reflective 1M White

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Roadbloc™ Support Post for Boards Red

    The RoadBloc™ from JSP has been manufactured from Solathene™ HD and the system has been extensively trialled to ensure that it surpasses the demands and expectations bestowed on Traffic Separators by today’s Traffic Management industry. It’s unique hinge allows it to form a mini roundabout with just eight units and to bend upwards so that they can stand firm on uneven ground. They can also be stacked very conveniently. Stacks of 20 RoadBlocs™ supplied securely banded.nnMini RoundaboutnEach barrier can swivel at its connection point up to 45° to enable 8 systems to form a circle.nnUneven TerrainnEach unit can be tilted at an angle whilst still connected making it ideal for use across uneven terrain.nnVisibilitynReflective strips can be placed to sit within a recessed area on each unit. There is also the option to add 1M high PVC barrier boards supported on 60mm diameter poles for increased visibility.nnBrandingnBespoke colours to suit corporate identities are available. Each unit contains 2 specific areas (one on each side) that can be embossed with a contractor’s name, logo etc.nnConvenientnEach Bloc features interlocking feet which allow the units to be stacked efficiently without the risk of them sliding apart, helping prevent pedestrian/worker accidents.

  • Smart Utilities Frontier® – 2M – Antitrip – White

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Standard Weight Fencing Blue

    Extruded from UV stabilised polypropylene. 50m x 1m rolls.

  • STW Frontier® – 2M – Antitrip – Red

    Frontier Cross-Link®
    nThe latest barrier system from JSP with unbeatable stabilityn
    nA NEW JSP® blow moulded barrier manufactured from UV stabilised impact modified HDPE. The design process was carried out in tandem with leading UK contractors to maximise wind flow through and around the system for unbeatable stability. Tested to ensure wind stability classes within BS8442 are achieved.
    n
    nFeatures & Benefits n

      n

    • Unbeatable stability – Designed in conjunction with leading UK contractors we have designed the Frontier Cross-Link® to maximise wind flow. This has led to a patent-pending barrier system with unbeatable stability. The Frontier Cross-Link® barrier has been tested to ensure its wind stability classes it within BS8442.
    • n

    • Unique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc™ and telescopic stability poles.
    • n

    • Flexible linking – The Frontier Cross-Link® has been designed with compatibility in mind. You can easily link the barrier system with other JSP® barriers as well as other brands. The flexible linking allows for the barrier system to be easily deployed on uneven ground such as rough terrain and kerbs.
    • n

    • Anti-tamper devices – Keep your barriers safe and secure with our Surelock™ connectors.
    • n

    • Easy storage – The Frontier Cross-link® barriers are stackable for ease of transport and storage. The stability poles can be stored inside the barriers and the clips, feet and link clips can all be folded away within the barrier.
    • n

    • Bespoke branding – Our barriers can be made to order to suit your company. Increase brand awareness by selecting custom colours for the barriers and accompanying feet as well as embossing your company logo on the barrier. Minimum order quantities apply on our bespoke barrier service.
    • n

    • Accessories – From Ad board clips to linking pegs the Frontier Cross-Link® has a large range of accessories.
    • n

  • Surefoot Bloc™ – Extra Stability Foot cover

    Surefoot Bloc
    Extra stability foot covers.n
    nThe patent pending SureFoot Bloc™ can be put over SureFoot™ feet of a Frontier™ Cross-Link™ and Titan™ barriers to add extra weight more effectively than alternative methods such as using sandbags. They can also be used as a weighted anchor for the Frontier™ using one of it’s carry handles to accept the telescopic stabilty poles and join it to the barrier.
    n
    nFeatures & Benefits n

      n

    • Stability – Heavy duty recycled PVC bloc – 6.5kg
    • n

    • Anti-slip – Underside anti-slip studs aid grip to ground surface, these also act as stacking features
    • n

    • Branding – Increase ownership and security by embossing your company name and logo on the Surefoot Bloc™. You can also colour the feet to suit your companies branding.
    • n

    • Carry handles – Incorporates two handles which double up to accept telesopcic stability poles
    • n

  • Surefoot™ Anti-trip Barrier Foot

    Surefoot™ Anti-trip – Strong, quality one piece anti-trip barrier foot.
    High density anti-trip feet for your JSP barrier. These anti-trip feet from JSP are scalloped in design to help prevent pedestrian and worker accidents. The Surefoot™ Anti-trip is made as one piece meaning that it is one of the strongest anti-trip foot options on the market, unlike other brands which can be made from multiple parts which can compromise on strength.
    n
    nFeatures & Benefits n

    Anti-trip – Reduce chance of accident by implementing anti-trip feet in high traffic areas such as pavements.

    Strong – high density one piece foot greatly reducing replacement feet.

    Cost effective – Without need to replace barrier feet you greatly increase the cost effectiveness of your barriers.

    Brand it – Increase ownership and corporate identity by colouring your Surefoot™ (Contact us for details)

  • Surefoot™ Standard Barrier Foot

    Surefoot™ – Strong, quality one piece barrier foot.
    These high density feet give excellent surface grip. The unique and strong one piece design and excellent foot quality massively reduce the necessity to purchase costly replacement feet.
    n
    nFeatures & Benefits n

    Strong – high density one piece foot greatly reducing replacement feet.

    Cost effective – Without need to replace barrier feet you greatly increase the cost effectiveness of your barriers.

    Brand it – Increase ownership and corporate identity by colouring your Surefoot™ (Contact us for details)

  • Surelock™ Anti-tamper Barrier Clips – Pack of 10

    SureLock – Anti-Tamper Clipsn
    nIncrease the security of your barrier system with the addition of SureLock™ clips. These clips work in conjunction with the standard Flexi-Clips™ securing your barriers together and increasing security. Once clicked together the clips can only be released with the use of a tool.
    n
    nFeatures & Benefits n

    nEffective – This simple and effective locking clip can only be opened with a tool to increase the security of your barrier system.
    n
    n• Secure – Allows system to be securely joined without restricting the configuration of the barrier system

  • Surepole™ Telescopic Stability Pole for Frontier®/Titan®

    Surepole™ Stability polesn
    nThe Surepole™ telescopic stability poles can be added to the Frontier® Cross-Link® barrier to increase wind stability by bracing two barriers together or attaching it to a Surefoot Bloc™.
    n
    nFeatures & Benefits n

    nWind resistance – When fitted correctly the stability poles ensure the barrier system meets BS8442 wind classes B and C
    n
    n• Increases Stability – The use of these poles enables barriers to be stabilised between 1m and 1.8m

    n• Stowaway feature – Store up to two poles in each Frontier® Cross-Link® ensuring easy and convenient storage

  • Titan® 2M Traffic barrier – Red

    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Titan® 2M Traffic Barrier Anti Trip Hi Vis Feet – Red

    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Titan® 2M Traffic Barrier Anti-Trip Black Feet – Red

    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Titan® Barrier Connector Clips (Pack of 10)

    Flexi-Clip®
    nLink your barriers together with these flexible clips. This linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.
    n

  • Titan® Expander Anti-Trip Barrier 3M Red/White

    Recommended Applications include: Hotels & Resorts, Department Stores, Leisure Centres, Cinema Foyers, Schools & Colleges, Hospitals, Railway Stations, Garage Forecourts, Air & Sea Ports, Industry, Maintenance & Factory Locations.

    Compact
    When closed the Titan® Expander Barrier is just 550mm which makes it extremely practical for transporting and carrying around.

    Flexibility
    Expanding action gives user length flexibility fixed-length barriers systems do not have.

    Compatibility
    The Titan® Expander can conveniently link to JSP´s Titan®, Barricader™ and Citadel™ Barriers.

    Feet Options
    Two feet options available; the standard foot and the New Anti-trip Foot design, painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Lightweight
    Overall weight of 10.5kg means it is light enough to handle with relative ease but stable enough to hold itself upright in windy conditions, rough ground or hustle and bustle from the public.

    Unique Clip
    Unique design of clip means that when barrier is closed it is held together for ease of transport and the it can also be used to connect multiple systems together when extended.

  • Titan® Expander Barrier 3M Black/Yellow

    Recommended Applications include: Hotels & Resorts, Department Stores, Leisure Centres, Cinema Foyers, Schools & Colleges, Hospitals, Railway Stations, Garage Forecourts, Air & Sea Ports, Industry, Maintenance & Factory Locations.

    Compact
    When closed the Titan® Expander Barrier is just 550mm which makes it extremely practical for transporting and carrying around.

    Flexibility
    Expanding action gives user length flexibility fixed-length barriers systems do not have.

    Compatibility
    The Titan® Expander can conveniently link to JSP´s Titan®, Barricader™ and Citadel™ Barriers.

    Feet Options
    Two feet options available; the standard foot and the New Anti-trip Foot design, painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Lightweight
    Overall weight of 10.5kg means it is light enough to handle with relative ease but stable enough to hold itself upright in windy conditions, rough ground or hustle and bustle from the public.

    Unique Clip
    Unique design of clip means that when barrier is closed it is held together for ease of transport and the it can also be used to connect multiple systems together when extended.

  • Titan® Expander Barrier 3M Blue/White

    Recommended Applications include: Hotels & Resorts, Department Stores, Leisure Centres, Cinema Foyers, Schools & Colleges, Hospitals, Railway Stations, Garage Forecourts, Air & Sea Ports, Industry, Maintenance & Factory Locations.

    Compact
    When closed the Titan® Expander Barrier is just 550mm which makes it extremely practical for transporting and carrying around.

    Flexibility
    Expanding action gives user length flexibility fixed-length barriers systems do not have.

    Compatibility
    The Titan® Expander can conveniently link to JSP´s Titan®, Barricader™ and Citadel™ Barriers.

    Feet Options
    Two feet options available; the standard foot and the New Anti-trip Foot design, painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Lightweight
    Overall weight of 10.5kg means it is light enough to handle with relative ease but stable enough to hold itself upright in windy conditions, rough ground or hustle and bustle from the public.

    Unique Clip
    Unique design of clip means that when barrier is closed it is held together for ease of transport and the it can also be used to connect multiple systems together when extended.

  • Titan® Expander Barrier 3M Green/White

    Recommended Applications include: Hotels & Resorts, Department Stores, Leisure Centres, Cinema Foyers, Schools & Colleges, Hospitals, Railway Stations, Garage Forecourts, Air & Sea Ports, Industry, Maintenance & Factory Locations.

    Compact
    When closed the Titan® Expander Barrier is just 550mm which makes it extremely practical for transporting and carrying around.

    Flexibility
    Expanding action gives user length flexibility fixed-length barriers systems do not have.

    Compatibility
    The Titan® Expander can conveniently link to JSP´s Titan®, Barricader™ and Citadel™ Barriers.

    Feet Options
    Two feet options available; the standard foot and the New Anti-trip Foot design, painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Lightweight
    Overall weight of 10.5kg means it is light enough to handle with relative ease but stable enough to hold itself upright in windy conditions, rough ground or hustle and bustle from the public.

    Unique Clip
    Unique design of clip means that when barrier is closed it is held together for ease of transport and the it can also be used to connect multiple systems together when extended.

  • Titan® Expander Barrier 3M Red/White

    Recommended Applications include: Hotels & Resorts, Department Stores, Leisure Centres, Cinema Foyers, Schools & Colleges, Hospitals, Railway Stations, Garage Forecourts, Air & Sea Ports, Industry, Maintenance & Factory Locations.

    Compact
    When closed the Titan® Expander Barrier is just 550mm which makes it extremely practical for transporting and carrying around.

    Flexibility
    Expanding action gives user length flexibility fixed-length barriers systems do not have.

    Compatibility
    The Titan® Expander can conveniently link to JSP´s Titan®, Barricader™ and Citadel™ Barriers.

    Feet Options
    Two feet options available; the standard foot and the New Anti-trip Foot design, painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Lightweight
    Overall weight of 10.5kg means it is light enough to handle with relative ease but stable enough to hold itself upright in windy conditions, rough ground or hustle and bustle from the public.

    Unique Clip
    Unique design of clip means that when barrier is closed it is held together for ease of transport and the it can also be used to connect multiple systems together when extended.

  • Placeholder

    Titan™ Anti Trip All Yellow Feet

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Unibase™

    For use with SpringBack cylinders. Manufactured from 100% recycled PVC. Can be positioned utilising either bitumen ‘GlueMats’ or with asphalt or concrete fixing bolts. Designed to accept ‘GloPosts’ and other manufacturers cylinders.

  • Placeholder
  • Placeholder

    Wessex Water 75cm Dominator™ Cone – Sealbrite Sleeve

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The preferred traffic management and term maintenance two-part moulded cone with UV stabilised LDPE moulded top and heavy duty 100% recycled composite base. All cones come complete with Sealbrite™ class R1B Sleeve.

  • Placeholder
  • Placeholder

    Wessex Water YTL Titan™ Anti Trip – 2M – Red

    Minimum order quantities apply on all bespoke products – Images used for illustration purposes only, custom products will vary.
    n
    The Titan® is the recognised and well established stacking barrier from JSP, it has all the usual advantages of standard stackable systems but in addition has many unique features. Titan® has undergone modifications to further improve longevity and to meet the proposed NRSWA changes effecting wind stability, setout in BS8442 when erected and assembled correctly.

    One Piece Mould
    The Titan® has been modified to a one-piece injection moulded design made from prime grade virgin Polypropylene offering sub-zero temperature and 2 year colour fastness properties. The new design is 100% metal free and fully recyclable.

    Reflective Panel
    Fully reflective panel meeting EN12899-2 requirements.

    Water Apertures
    Water Apertures have been added to the one-piece mould so that when they are stacked they do not collect water within the frames and therefore do not add extra weight or inconvenience.

    nUnique support technology – Stability can be increased even further with the addition of the patent pending Surefoot Bloc® and telescopic stability poles.
    n
    Flexi-Coupling Clips
    This new linking facility enables easy connecting and compatibility with not only other styles of JSP barriers but also other brands. The clip can be conveniently retained to give added rigidity.

    Stable Feet
    H.D. foot giving excellent surface grip. The unique design and excellent foot quality ensure that there is no need to purchase spare feet.

    Anti-Trip Feet
    The Titan® has the option of having Anti trip feet which has a new scalloped design to prevent pedestrian/worker accidents. They are also painted in a high visibility yellow and featuring two reflectors per foot for extra visibility in low light situations.

    Stackable
    The clever design allows for simple and practical storing, stacking, and unstacking.

    Contractor Branding
    There is a large area to allow contractor branding details to be hot-foil or embossed. The one-piece mould can be made in any colour and a three-piece version can be made with different coloured end pieces to match a corporate identity. Even the feet can be coloured to suit.

    Toggles
    Branding/courtesy boards can quickly be attached using easy to lock and unlock toggles.

    Manufactured & Tested To The Highest Standards

    Durability/Robustness
    We leave the barrier after moulding for 12 hours minimum then slowly drive a 4000Kg Fork Lift Truck over it. During this test the barrier does not break, crack, split or parts come away. Some minor damage/marking is seen but the barrier is still usable. Each production batch is tested to prove that the material is to our required specification.

    Stability
    We carry out a ‘Balance Point’ test on many competitors’ barriers to assess stability. Our system compares very favourably with all plastic barriers of this style and weight. The balance point of the Titan® is 45°, any angle below this and the barrier will move back to the upright position.

    Pull Test
    We place a spring balance in the top, centre of a single barrier, we then note the maximum reading on the balance to pull the barrier away from its vertical, rest position. For a single barrier, the figure is approximately >3.2kg. We then link 3 barrier systems together and repeat this test on the middle/central barrier, the maximum reading for this test is >7.5kg.

  • Workgate™ 3 Gate with Reflectives – Blue

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ 3 Gate with Reflectives – Red

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ 3 Gate with Reflectives – Yellow

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ 4 Gate with Reflectives – Blue

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ 4 Gate with Reflectives – Red

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ 4 Gate with Reflectives – Yellow

    The WorkGate™ is a robust mini barrier designed with contractors in mind. Supplied as 3 or 4 gate versions offering a very versatile solution to many environments and requirements.

    Reflective Panel
    Fully reflective panel meeting EN12899-1 requirements.

    Flexible Linking
    Black adjoining clips give flexible multi positioning configurations.

    Handles
    Convenient handles with moulded finger grips make the WorkGate™ especially easy to manoeuvre.

    Contractor Branding
    Large area to allow contractor details to be applied in decal form.

    Feet
    Optional anti-trip feet create a more stable WorkGate™ for linear usage.

    Options
    The WorkGate™ can be linked to for a square, a triangle or in a single line making it practical for most uses and environments.

    Recyclable
    Contains no metal parts, making it ideal for working in electrical environments and easy to recycle.

    Temporary Signage
    Locating holes enable courtesy orpedestrian signs to be fitted.

  • Workgate™ Foot

    Yellow, blue or red systems supplied with top reflective panels, or with black vertical panels, depending on specific usage. Easily folds up for quick siting. Lightweight for storage and handling purposes. Each panel has integral location holes to accept white foamex courtesy/warning sign. Made entirely from plastic materials, non-sparking, non-conductive.

  • Workgate™ Single Gate with Reflective – Red

    It is apparent in urban street works situations that on occasions a solution is required to close the footway. Whilst popular 2m long barriers are very effective they can prove awkward when the Footway™ needs to be closed to protect the public. JSP have devised a method to overcome such occurrences by integrating our single WorkGate™ panel with existing Titan®, Barricader™ or Citadel™ barrier´s.

    Sturdy
    Sturdy 0.8mtr wide gate with class 2 reflective material links between 2 existing barriers using end coupling.

    Adaptability
    The unique clips allow various JSP barriers to interlock with each other to suit most environments and situations.

    Signage
    Gate allows signage to be added alerting pedestrians to works in progress, deep excavation etc.

    Recycled Feet
    Recycled pvc feet (2 of) should be fitted to ensure total stability and these have anti trip feature.

    Child Deterrent
    Design of the gate is such that it will deter children from attempting to swing on the barrier, another safety feature and deterrent factor.

  • Wychwood™ Flexible Verge Post

    Moulded springback post with large reflective area conforming to RI EN12899-1 class R2 reflector.

  • Wychwood™ Flexible Verge Post Danger Overhead Cables

    Wychwood™ Flexible Verge Post Danger Overhead Cablesnn
    nMoulded spring back post with large area for reflective comes with “Danger Overhead Cables” sign
    n
    nFeatures & Benefits n

      n

    • Highly Flexible – Rebounds after impact and returns tonupright position.
    • n

    • Tall – Height above ground when sited is 1 metre.
    • n

    • Increased Stability – Integral barb on rear prevents ease of removal.
    • n

    • Added Security – Bottom hole allows bar to be inserted for addednsecurity when sited.
    • n

    • Options – Other legends can be created such asn‘underground cables’ etc.
    • n

  • Wychwood™ Flexible Verge Post Danger Overhead Cables

    Wychwood™ Flexible Verge Post Danger Overhead Cablesnn
    nMoulded spring back post with large area for reflective comes with “Danger Overhead Cables” sign
    n
    nFeatures & Benefits n

      n

    • Highly Flexible – Rebounds after impact and returns tonupright position.
    • n

    • Tall – Height above ground when sited is 1 metre.
    • n

    • Increased Stability – Integral barb on rear prevents ease of removal.
    • n

    • Added Security – Bottom hole allows bar to be inserted for addednsecurity when sited.
    • n

    • Options – Other legends can be created such asn‘underground cables’ etc.
    • n

  • Wychwood™ Flexible Verge Post Danger Underground Cables

    Wychwood™ Flexible Verge Post Danger Underground Cablesnn
    nMoulded spring back post with large area for reflective comes with “Danger Underground Cables” sign
    n
    nFeatures & Benefits n

      n

    • Highly Flexible – Rebounds after impact and returns tonupright position.
    • n

    • Tall – Height above ground when sited is 1 metre.
    • n

    • Increased Stability – Integral barb on rear prevents ease of removal.
    • n

    • Added Security – Bottom hole allows bar to be inserted for addednsecurity when sited.
    • n

    • Options – Other legends can be created such asn‘overhead cables’ etc.
    • n

  • Zebra Tape 100M Red/White

    A range of red/white zebra tape in 4 lengths and black/ yellow in 500m length only.

  • Zebra Tape 500M Red/White

    A range of red/white zebra tape in 4 lengths and black/ yellow in 500m length only.

  • Zebra Tape 500M Yellow/Black

    A range of red/white zebra tape in 4 lengths and black/ yellow in 500m length only.

  • Zebra Tape 50M Red/White

    A range of red/white zebra tape in 4 lengths and black/ yellow in 500m length only.