Hoofdbescherming

Toont alle 392 resultaten

  • Black Nylon Sweatband – EVO® Range

    Black nylon sweatband for EVO® range of safety helmets (Does not fit EVO8®)

  • Black Nylon Sweatband to suit Bourton™ Bump Caps

    Brushed nylon backed foam sweatband for use with Bump Caps.

  • Blue CR2™ Reflective Kit for EVO2/3® Pack of 10

    EVO®2/3 CR2 Decal Kit
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • Blue CR2™ Reflective Kit for EVOLite® Pack of 10

    EVOLite® CR2 Decal Kit
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • Bourton™ Bump Cap Blue

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Comfort Plus Blue

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Comfort Plus Green

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Comfort Plus Red

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Comfort Plus White

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Comfort Plus Yellow

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Green

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Orange

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Red

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap White

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Bourton™ Bump Cap Yellow

    Bourton™ Bump Cap
    nLightweight polyethylene shell with polythylene or terylene harness. Conforms to EN812.
    Polyethylene harnessed Bourton™ is ideal for use in the food processing industry, being very easy to clean.

  • Careys EVO3® Slip – Vented – Yellow (no spare s/band)


    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO3®Industrial Safety Helmet
    The EVO3® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO3® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO3® retains the JSP signature styling while incorporating developments first seen in the EVO8®. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO3® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • Central Spares MK7® Forestry – Orange


    nThe Classic Mk7® Industrial Safety Helmet
    nThe JSP Mk7® safety helmet is the ultimate in EN397 head protection. Years of research and development went into creating the most comfortable, safest helmet available, packed with features to maximise comfort and safety. All round head protection, protects the head from every angle not just the magic circle on the crown required for EN397.
    nThe iconic design of the Mk7® hard hat has become the solid foundation for the new Evolution range. Its no-nonsense appearance and strength have made Mk7® one of the most recognisable modern safety helmets available today. With a much copied style that has become a true classic, a design that still performs far higher than the EN397 standard requires, coupled with its tried and tested flexibility, make the Mk7® a true asset for any workforce.
    n
    nSuitable for:
    • Construction
    • Engineering
    • Manufacturing
    • Electrical Engineers
    • External Telecoms
    n
    nAttachments
    Universal slots enable firm fitting of Surefit Contour™ ear defenders and a range of Surefit™ safety visors for complete above the head protection, meaning all your protection is to hand and easy to deploy.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual shape of the wearer’s head. A rain channel directs rain away from wearer’s face.
    n
    nShort Peak
    Reduced peak available for better vision whilst working at heights.
    n
    nAdjustment
    Easyjust® slip ratchet.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nRetractaspec™
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n

  • Chamlon™ Sweatband – EVO® Range

    Chamlon sweatband for EVO® range of safety helmets (Does not fit EVO8®)

  • Cold Weather Helmet Warmer – Black

    Full head & face comforter easily attached to the helmet harness for comfort and warmth.
    Available for MK7&#174 / EVOLite™ / EVO2&#174 / EVO3&#174 / EVO8&#174

  • Cold Weather Safety Helmet Comforter

    Full head comforter easily attached to the helmet harness for comfort and warmth.
    Available for MK7&#174 / EVOLite™ / EVO2&#174 / EVO3&#174 / EVO8&#174

  • Comfort Pads with Spare Hook & Loop Coins to fit Hardcap Aerolite


    n

    HardCap AeroLite®

    n

    OUR LIGHTEST FULL SHELL BUMPCAP

    n

    nThe new HardCap AeroLite® is the lightest full shell bumpcap available on the market.
    n
    nA direct Evolution of the ever popular HardCap A1+™, the HardCap AeroLite® represents the forefront of innovation within the JSP® head protection range, providing complete protection in its category by meeting the requirements of the EN812:2012 BSI® Standard.
    n
    nDeveloped and refined by JSP® Ltd.´s in-house Research and Development department the HardCap AeroLite® weighs less than 135g without compromising on performance. Consistently passing and exceeding the required impact tests the HardCap AeroLite® is the best performing lightweight bump cap on the market.
    n

    Benefits and Features

    n

      nCool airflow
      The HardCap AeroLite® is arguably the coolest bump cap on the market providing better air flow than the HardCap A1+™ and all of its competitors.

      nCompletely lightweight
      Weighing less than 135g without compromising safety HardCap AeroLite® is made using a lightweight EPP (Expanded Polypropylene) impact liner combined with a tough HDPE shell. All wrapped in a lightweight baseball style outer cap.

      nClean Odourless
      Both the sweatband and comfort liner have been coated with Polygiene®, an anti-bacterial treatment that acts as an internal deodorant counteracting the development of unpleasant odours. Thanks to its hygienic function it effectively prevents bacterial proliferation by increasing freshness and comfort of the fabric in contact with skin greatly reducing the risk of contact dermatitis. Polygiene® has a UK Class 1 medical certificate and offers a life-time guarantee for odour control.

      nQuick drying
      The integrated sweatband is designed to be moisture wicking allowing liquids to spread out across the fabric increasing the rate of evaporation.

      nSide reflection
      Large reflective panels feature on the side of the HardCap AeroLite® adding product and user visibility.

      nRepels water
      To add increased resistance to staining the stylish baseball cap outer lining has been treated with a DWR (Durable Water Repellent) coating that allows water to bead and roll off of the cap.

      nMaintainable
      We provide replacement covers and inserts as a cost effect alternative to replacing your end of life products (Sold separately).n

    n

    nWe use Polygiene® on this product to help keep it fresh and odourless.

    How does it work?
    Polygiene® prevents the growth of odour-causing bacteria and fungi at the source, permanently!

    Click here to find out more

    nn

  • CR2™ Prismatix™ Hi-Vis Orange for EVO2/3® Pack of 2

    Prismatix™ CR2 Hi-Vis Orange Decal Kit for EVO®2/3
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • CR2™ Prismatix™ Hi-Vis Orange for EVOLite® Pack of 2

    Prismatix™ CR2 Hi-Vis Orange Decal Kit for EVOLite®
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • EVO® 6100 Full Brim Wheel – White

    Build UK approved colour

    nEVO6100 Full Brim™ Revolution™ Wheel Ratchet – Whiten
    nThe EVO6100 Full Brim™ safety helmet combines a super strong HDPE shell with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nTextile Harnessn
    nHDPE strap & webbing clips with polyester webbing strapsn

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nFull Brimn
    nThe full brim provides additional protection to the neck and ears against sun, glare, rain, snow and falling debris.n

    nChamlon™ Sweatbandn
    nEgyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically testedn

  • EVO® Electric Arc Visor & Carrier – For Inter™ Ear Defenders

    EVO® Electric Arc Visor & Carrier – For Inter™ Ear Defendersn

    n

  • Polycarbonate Visor
  • n

  • Compatible With EVO helmets
  • n

  • Electrical Resistance
  • n

  • Compatible with Inter Ear Defenders
  • EVO® inter helmet mounted visor carrier (ABS)

    Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evoloution® range. ABS

  • EVO® inter short peak helmet mounted visor carrier

    Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evoloution® range. For used with reduced peaks.

  • EVO® Lamp and Goggle Clips – Pack of 4

    Lamp / Goggle Clips – 4 Pack

    Pack of 4 Clips used to secruely attach head lamps and googles to an EVO2®, EVO3®, EVO6100® and EVOlite® Safety Helmets.

    Pack of 4 Clips ONLY – Goggles/Safety Helmet not included

  • EVO® Surefit™ Carrier & 20cm Visor – EVO® Range

    Surefit™ visor carrior to fit EVO® range of safety helmets. Fits the InterGP/EX™ helmet mounted ear defenders.

  • Placeholder

    EVO®2 Safety Helmet with Slip Ratchet – Black – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Green

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Green – Vented

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Pink – Vented

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Red

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Red – Vented

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Yellow

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®2 Safety Helmet with Slip Ratchet – Yellow – Vented

    Minimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO2®Industrial Safety Helmet
    The EVO2® Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO2® is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO2® retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO2® proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point polyethylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 CR2™ & Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 CR2™ & Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Slip Ratchet – Green

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Slip Ratchet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Slip Ratchet – Red

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Wheel Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Linesman Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Linesman Yellow

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • Placeholder

    EVO®3 Micro Peak Slip Ratchet – Black – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Green – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Red

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Red – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Yellow

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Slip Ratchet – Yellow – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • Placeholder

    EVO®3 Micro Peak Wheel Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Micro Peak Wheel Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Mid Peak Slip Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Mid Peak Slip CR2 Miners White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.

  • EVO®3 Mid Peak Slip Green

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Mid Peak Slip Miners Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’e2’80’99s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.

  • Placeholder

    EVO®3 Mining – OneTouch™ Slip Ratchet – Red

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970rquote s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVO®3 Mining – OneTouch™ Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’e2’80’99s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.

  • EVO®3 Mining – OneTouch™ Slip Ratchet – Yellow

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’e2’80’99s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.

  • EVO®3 OneTouch™ Slip Ratchet – Black – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Green – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Grey – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Red

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Red – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Yellow

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 OneTouch™ Slip Ratchet – Yellow – Vented

    n
    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Green

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Green – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®5 Olympus® Hard Hat – Slip Ratchet – White

    Build UK approved colour

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Slip Ratchet – White – Vented

    Build UK approved colour

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Slip Ratchet – Yellow

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Slip Ratchet – Yellow – Vented

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Wheel Ratchet – White

    Build UK approved colour

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Wheel Ratchet – White – Vented

    Build UK approved colour

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®5 Olympus® Hard Hat – Wheel Ratchet – Yellow

    nEVO®5 Olympus® Revolution® Wheel Ratchet – Whiten
    nThe EVO®5 Olympus® safety helmet combines a super strong ABS shell designed for superior all day protection with the comfort benefits of the Evolution® 3D-Adjustment™ harness system.n
    n
    nUniversal Testingn
    nEVO®5 Olympus® Industrial safety helmet passes all relevant industrial international standards.n
    n
    nMulti-Standardn
    n

  • EN397 – Industrial safety helmets
  • n

  • ANSI/ISea Z89.1 – American National Standard for Industrial Head Protection
  • n

  • CSA Z94.1 – Industrial Protective Headwear – Performance, Selection Care and Use
  • n

  • GB2811- China National Standard for Industrial Head Protection
  • nTextile Harnessn
    nA 6 point Terylene cradle harness system & Egyptian cotton Chamlon™ sweat band offers unrivalled comfort. 3D adjustment offers 1-2-3 point harness depth settings for a perfect fit.n

    nRevolution®n
    nThe Revolution® wheel ratchet has deep nape strap that enables the firmest retention of any helmet, with a simple turn fastening system.n

    nEVOSpec®n
    nIntegrated eyeshield that removes the need for additional eye protection and ensures that eye protection is on hand when needed and never lost.n

    nVentilationn
    nSide and rear ventilation for optimum air movement inside the shell, reducing helmet temperatures by an average 2-3 degrees, increasing the comfort for the wearer.n

    nCR2™ Reflectiven
    nCR2 is the biggest step-up in night time visibility / reflectivity of head protection to date. Conforms to Class R2, EN12899-1n

    n3D Adjustmentn
    nBoth the textile and polyethelene harnesses feature unique 1-2-3 point harness depth settings. This offers the most precise fit attainable on an industrial safety helmet.n

  • EVO®8 EN14052 Safety Helmet – Blue

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Green

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Orange

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Red

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – Blue

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – Green

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet is the only industrial hard hat in the world meeting and exceeding the far tougher head protection standard EN14052 – this is the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of over 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All Round Protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – Orange

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – Red

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet is the only industrial hard hat in the world meeting and exceeding the far tougher head protection standard EN14052 – this is the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of over 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All Round Protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – White

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – Vented – Yellow

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet is the only industrial hard hat in the world meeting and exceeding the far tougher head protection standard EN14052 – this is the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of over 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All Round Protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nInstruction leaflet

  • EVO®8 EN14052 Safety Helmet – White

    n n

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the only industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c requirements.
    n

  • EVO®8 EN14052 Safety Helmet – Yellow

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman Blue

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman Green

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman Orange

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman Red

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman White

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Linesman Yellow

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Railway Blue

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Railway Red

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Railway White

    Build UK approved colour

    nMk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    nUltra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®8 Safety Helmet – Railway Yellow

    Mk8® Evolution® EN14052 Industrial Safety Helmet
    nThe Mk8® Evolution® safety helmet was the first industrial hard hat in the world to meet and exceed the far tougher head protection standard EN14052 – this was the biggest advance in industrial head protection in over 45 years. The EVO®8 safety helmet is designed for today’s highest risk environments where high impact / side impact situations are a concern such as Construction, Mining, Tunnelling, Demolition, Oil and Gas, Offshore Marine, Refinery and Petrochemical, High Pressure Jetting and certain Emergency Services. EN14052 is specified into EN1789 as a mandatory requirement for each crew member for type B & C road ambulances.
    n
    nDesigned and developed over two years the EVO®8 safety helmets excellent build quality complements the high standard of design and materials which go into the helmet, including features such as a high density liner and a comfortable new harness system which create unparalleled wearer comfort and acceptability.
    n
    nEN14052 requires the helmet to withstand over 100 joules crown impact (compared to 49 joules under EN397) and for the first time to withstand side impact protection of 50 joules to an angle of up to 60 from vertical in a 360° radius around the shell.
    n
    nSuitable for:
    • Demolition
    • Heavy Construction
    • Mining / Tunnelling
    • Refinery, Oil and Gas
    • Offshore / Marine
    n
    nImpact Protection
    Side, front and rear impact protection from the shock absorbing EPS liner. Vented liner to increase comfort whilst maintaining high protection factor. Liner optimises low angle impact performance.
    n
    nOuter Shell
    Ultra high strength outer shell. Ribbed upper section dissipates impact energy. All round protection, down to 60° from vertical. Large print area on front & sides for logo printing.
    n
    nComfort
    Extremely comfortable terylene webbing moulds to the individual wearer’s head. Lightweight EPS liner reduces weight while still offering maximum protection.
    n
    nAttachments
    International slot enables firm fitting of a range of Surefit™ safety visors and ear defenders. Wide variety of visors available. Incorporates steel springs for easy deployment and retraction. High perfomance Surefit™ ear protection offers an SNR of 28. Accessories sold separately
    n
    nAdjustment
    Intuitive thumb and forefinger press points for easy adjustment of the wheel ratchet, offers diverse size ranges for true ‘One Size Fits All’.
    n
    nElectrical Insulation
    The un-vented version meets EN14052 440V a.c.requirements.
    n
    nInstruction leaflet

  • EVO®2 Safety Helmet with Slip Ratchet – Blue – Vented


    n
    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    OneTouch™ Slip Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO®3 Revolution® Wheel Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • EVO3® Revolution® Wheel Ratchet – Black – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVO®3 Industrial Safety Helmet
    The EVO®3 Comfort Plus™ helmet combines a super strong shell for superior all day protection in the widest range of environments, with the comfort benefits of the new Evolution® 3D Adjustment™ harness system. EVO®3 is a true evolution of the long established MK2® and Mk3® helmets, which were first launched in the 1970’s, the EVO®3 retains the JSP signature styling while incorporating developments first seen in the EVO®8. Packed full of the latest protection technology and features such as the Evolution® 3D Adjustment™ harness system, Revolution® Wheel Ratchet or the unique OneTouch™ Slip Ratchet, which can be adjusted using one hand in a single swift movement.
    n
    nTough HDPE shell
    In tests the EVO®3 proved far tougher than the EN397 standard required and far tougher than any of it’s competitors.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon™ Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nAdjustment
    Revolution® Wheel Ratchet.

    Electrical Insulation
    Meets the EN 50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additional eye protection. Protects to EN166.1.F
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.
    n
    nBranding
    Extra large area for logos on the front, sides, and rear.
    n
    nElectrical Insulation (Non-vented only)
    nThe un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.

  • Placeholder

    EVO8® Replacement Sweatband Grey

    Replacement sweatband for the EVO8® safety helmet

  • EVO8® Replacement Wheel Harness

    Replacement harness for the EVO8® safety helmet

  • EVOLite® CR2™ – Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® CR2™ Slip Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® CR2™ Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® CR2™ Slip Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® CR2™ Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Forestry Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Green

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Green – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Slip Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Green – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Linesman Wheel Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • Placeholder

    EVOLite® Linesman Wheel Ratchet -White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Linesman Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Slip Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • Placeholder

    EVOLite® Micro Peak Wheel Ratchet – Black – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Micro Peak Wheel Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Black

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Green

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – White

    Build UK approved colour

    nEVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Skyworker™ Industrial Climbing Helmet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.
    n
    EVOLite® Skyworker Industrial Height Safety Helmet
    nThe EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform. n

    nStrong Light Shelln
    nConforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.n

    nE.P.S Linern
    nSide, front and rear impact protection from the shock absorbing E.P.S liner.n

    nComfort Harnessn
    nA 6-point Terylene harness system with a Revolution® wheel ratchet & 3D adjustment.n

    n4-Point Chinstrapn
    nFully adjustable 4-point chinstrap with quick release buckle.n

    nImpact Protectionn
    nSide, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.n
    n
    nSupreme Comfortn
    nA 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.n

    nAccessoriesn
    nA universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.n

    nUniversal Slotsn
    nEnables firm fitting of a range of Surefit™ safety visors and ear defenders.n

    nBrandingn
    nExtra large area for logos on the front, sides, and rear.n

    nCR2™ Reflectiven
    nCR2™ Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions.n

  • EVOLite® Slip Ratchet – Black – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Green – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Grey – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Orange

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Red

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Slip Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    One Touch &#8482 Slip Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Blue

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Blue – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Green – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Orange – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Red – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – White

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – White – Vented

    Build UK approved colour

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Yellow

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® Wheel Ratchet – Yellow – Vented

    nMinimum order quantities apply on all bespoke products − Images used for illustration purposes only, custom products will vary.

    nEVOLite® EN397 Industrial Safety Helmet
    nThe EVOLite® is a breakthrough product enabling Health and Safety Officers to achieve new levels of compliance due to its unrivalled comfort. It is lightweight, extremely comfortable and fits the widest range of head shapes and sizes. The harness and shell are truly integrated as one to give the best performance by keeping it firmly rooted on the head, even when fully inverted. Gives added security and protection when working at height, in high winds, or when there is a high degree of activity, such as during motorway maintenance.
    n
    nLightweight Shell
    Weighing less than 300g (dependent on model), the EVOLite® is the lightest safety helmet for sale in the UK.
    n
    nSupreme Comfort
    A 6-point terylene cradle harness system offers unrivalled comfort without compromising performance.
    n
    nChamlon&#8482 Sweatband
    Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
    n
    n3D Precision Fitting
    Never before has such a precise fit been attainable on an industrial safety helmet, using the unique 1-2-3 point harness depth settings.
    n
    nElectrical Insulation (Non-vented only)
    The un-vented version meets EN50365 Class 0 10KV standard. This standard is applicable to electrically insulated helmets used for working live or close to live parts on installations not exceeding 1000Vac or 1500Vdc.
    n
    nAdjustment
    Revolution® Wheel Ratchet.
    n
    nEVOSpec®
    The helmet with integral visor ensures that eye protection is on hand when needed and never lost, whilst removing the need for additionaleye protection. Protects to EN166.1.F. EVOSpec® Sold Separately
    n
    nUniversal Slots
    Enables firm fitting of a range of Surefit™ safety visors and ear defenders.

    Branding
    Extra large area for logos on the front, sides, and rear.
    n

  • EVOLite® with CR2™ and ID Badge Holder – Blue

    Fully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n
    n

  • EVOLite® with CR2™ and ID Badge Holder – White

    EVOLite® ID Card Holdern
    n
    nFully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n
    n

  • EVOLite® with CR2™ and ID Badge Holder – Yellow

    EVOLite® ID Card Holdern
    n
    nFully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n
    n

  • EVOLite® with ID Badge Holder – Blue

    Fully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n

  • EVOLite® with ID Badge Holder – White

    Fully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n

  • EVOLite® with ID Badge Holder – Yellow

    EVOLite® ID Card Holdern
    n
    nFully waterproof clear plastic ID card holder raising visibility, quick and easy interchanging of cards from the simple push and slide mechanism. Can accommodate standard business card sizes.n
    n
    n• Water protection for cardsn
    n
    n• Cards easily changedn
    n
    n• Lightweight – 47g approximatelyn
    n
    n

  • EVOSpec® Safety Eyewear – EVO® Range – Clear

    EVOSpec®
    Easy assembly kit for adding a clear, polycarbonate, retractable eyeshield to an existing EVOLite® / EVO3&;8482; helmet. Conforms to EN166.1.F

  • EVOSpec® Safety Eyewear – EVO® Range – Smoke

    EVOSpec®
    Easy assembly kit for adding a smoke, polycarbonate, retractable eyeshield to an existing EVOLite® / EVO3&;8482; helmet. Conforms to EN166.1.F

  • First Aid CR2™ Reflective Kit for EVO2/3® Pack of 10

    EVO®2/3 CR2 Decal Kit
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • First Aid CR2™ Reflective Kit for EVOLite® Pack of 10

    EVOLite® CR2 Decal Kit
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • GORT Cold Weather Helmet Warmer – Orange

    High visibility orange full head & face comforter. GO/RT 3279.
    Available for MK7&#174 / EVOLite™ / EVO2&#174 / EVO3&#174 / EVO8&#174

  • Green CR2™ Reflective Kit for EVO2/3® Pack of 10

    EVO®2/3 CR2 Decal Kit
    nThis kit allows you to add extra visibility to your head protection. CR2 is highly reflective offering on average 60% more reflectivity than standard reflective clothing material.
    n
    nFeatures & Benefits n

    nVisibility – Increases visibility on siten

    n• Recognition – Easily identify workers and their roles on siten

    n• Branding – Match colours to enhance your corporate identityn
    n
    CR2™ decal kit only, safety helmet not included.n
    n
    nApplying a CR2™ decal kit to your Evolution® Safety Helmet
    nBelow is a video demonstrating how to apply the decal kit to your safety helmet. The video shows the process for an EVOLite® safety helmet but the process is the same for any Evolution® safety helmet. Placing of decals can vary so refer to helmet specific placements included on rear of decal kit packaging.

    n

    n

    n

    n

  • Hardcap A1+™ 2.5cm Micro Peak – Black


    nHardcap A1+™ Bump Cap
    The new HardCap A1+™ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it’s almost impossible to distinguish from a standard ‘high street’ baseball cap.
    n
    nThe unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.
    n
    nReflective Piping
    Reflective piping on all models adds extra visibility and therefore safety in all working environments.
    n
    nVentilation
    Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.
    n
    nUnique Adjuster
    Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.
    n
    nAll Round Protection
    The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.
    n
    nSweat Band
    Terry towelling sweatband adds comfort and absorption for the wearer.
    n
    nLow Profile Design
    Ultra sleek low profile design means the HardCap A1+™ is almost indistinguishable from a high street ‘fashion’ baseball cap.
    n
    nHi-Visibility
    Available in Hi-visibility orange and yellow, great for low light environments.
    n

  • Hardcap A1+™ 2.5cm Micro Peak – Black/Grey


    nHardcap A1+™ Bump Cap
    The new HardCap A1+™ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it’s almost impossible to distinguish from a standard ‘high street’ baseball cap.
    n
    nThe unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.
    n
    nReflective Piping
    Reflective piping on all models adds extra visibility and therefore safety in all working environments.
    n
    nVentilation
    Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.
    n
    nUnique Adjuster
    Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.
    n
    nAll Round Protection
    The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.
    n
    nSweat Band
    Terry towelling sweatband adds comfort and absorption for the wearer.
    n
    nLow Profile Design
    Ultra sleek low profile design means the HardCap A1+™ is almost indistinguishable from a high street ‘fashion’ baseball cap.
    n
    nHi-Visibility
    Available in Hi-visibility orange and yellow, great for low light environments.
    n

  • Hardcap A1+™ 2.5cm Micro Peak – Black/Hi-Vis Orange


    nHardcap A1+™ Bump Cap
    The new HardCap A1+™ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it’s almost impossible to distinguish from a standard ‘high street’ baseball cap.
    n
    nThe unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.
    n
    nReflective Piping
    Reflective piping on all models adds extra visibility and therefore safety in all working environments.
    n
    nVentilation
    Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.
    n
    nUnique Adjuster
    Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.
    n
    nAll Round Protection
    The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.
    n
    nSweat Band
    Terry towelling sweatband adds comfort and absorption for the wearer.
    n
    nLow Profile Design
    Ultra sleek low profile design means the HardCap A1+™ is almost indistinguishable from a high street ‘fashion’ baseball cap.
    n
    nHi-Visibility
    Available in Hi-visibility orange and yellow, great for low light environments.
    n

  • Hardcap A1+™ 2.5cm Micro Peak – Grey/Red


    nHardcap A1+™ Bump Cap
    The new HardCap A1+™ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it’s almost impossible to distinguish from a standard ‘high street’ baseball cap.
    n
    nThe unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.
    n
    nReflective Piping
    Reflective piping on all models adds extra visibility and therefore safety in all working environments.
    n
    nVentilation
    Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.
    n
    nUnique Adjuster
    Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.
    n
    nAll Round Protection
    The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.
    n
    nSweat Band
    Terry towelling sweatband adds comfort and absorption for the wearer.
    n
    nLow Profile Design
    Ultra sleek low profile design means the HardCap A1+™ is almost indistinguishable from a high street ‘fashion’ baseball cap.
    n
    nHi-Visibility
    Available in Hi-visibility orange and yellow, great for low light environments.
    n

  • Hardcap A1+™ 2.5cm Micro Peak – Hi-Vis Orange


    nHardcap A1+™ Bump Cap
    The new HardCap A1+™ is another major innovation from JSP in head protection design. Designed to exceed the most recent standards, EN812:2012, years of thought and design iterations have been undertaken to develop a product that is unrivalled in both performance and style. Sleek and low profile, it’s almost impossible to distinguish from a standard ‘high street’ baseball cap.
    n
    nThe unique angled adjuster designed to fit under the occipital bone at the rear of the skull means that one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, therefore the cap part is machine-washable for hygiene purposes. It has a terrytowelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.
    n
    nReflective Piping
    Reflective piping on all models adds extra visibility and therefore safety in all working environments.
    n
    nVentilation
    Extra holes in the liner plus the two mesh panels on the outer mean added ventilation for coolness and comfort.
    n
    nUnique Adjuster
    Unique one-handed angled adjuster to quickly fit, giving true one size fits all. Sizing ranges from 53cm to 63cm headsize.
    n
    nAll Round Protection
    The protective liner is removable, so the outer cap is fully washable for hygiene purposes and extended life cycle.
    n
    nSweat Band
    Terry towelling sweatband adds comfort and absorption for the wearer.
    n
    nLow Profile Design
    Ultra sleek low profile design means the HardCap A1+™ is almost indistinguishable from a high street ‘fashion’ baseball cap.
    n
    nHi-Visibility
    Available in Hi-visibility orange and yellow, great for low light